Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.     

椒江口海域围填海强度及环境影响分析

文章对近10年来椒江口两岸主要的围填海工程进行了统计,利用基于围填海强度等级控制理念的围填海潜力评估方法,对椒江口海域的围填海强度及围填海潜力进行了定量评估,并对其造成的环境影响进行了分析。分析结果显示,椒江口海域虽然仍有一定的围填海潜力,但围填海压力较大,椒江口大规模的围填海工程对海岸带地形地貌、海域水文动力环境、滨海湿地生态系统、海洋水环境质量、海洋生物资源等均存在负面影响,为此提出了强化围填海管控、重视海岸带整治修复等建议,以期为椒江口的围填海管控和生态环境保护提供参考。     

深海弯曲水道内部一种特殊的沉积单元:凹岸坝

在深海水道研究过程中,识别出深海弯曲水道内部存在一种特殊的沉积单元--凹岸坝,基于尼日尔三角洲陆坡区浅层高频三维地震资料,利用地震相分析技术,探究了凹岸坝的沉积结构特征和形成机制,讨论了其与水道弯曲丘(nested mounds)、曲流河凹岸滩坝之间的差异。研究结果表明:凹岸坝是分布于曲率较大、以垂向加积为主的末期水道弯曲凹岸处的坝体沉积单元,该沉积单元在地震剖面上表现为强振幅、连续性较好的反射特征,其内部沉积界面倾向于水道弯曲凸岸处,倾角约1°~20°,且在凹岸弧顶处达到最大值。凹岸坝形成的关键在于惯性作用,其造成水道内部重力流流体在弯曲处发生溢岸,导致流量减少,流体动能相应降低,流体携砂能力小于沉积物负载,造成沉积物快速沉降,从而形成凹岸坝。由于凹岸坝是一种连续性较好的砂体沉积,所以其可成为潜在的、储集性能较好的油气储集体。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

脐带缆螺旋滑移分析及力学性能研究

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。     

强光照和黑暗条件下刺参体壁的基因表达差异

参对光照变化非常敏感，研究刺参对光照的分子响应非常重要。本研究应用RNA测序获取了刺参暴露于强光（“强光”）、正常光照（“对照”）和完全黑暗（“黑暗”）环境下体壁的基因表达谱情况，通过“对照”与“黑暗”，“对照”与“强光”和“黑暗”与“强光”的比较，在|log₂ ratio|≥1和FDR≤0.001的标准下分别发现了1161、113和1705个差异表达基因（DEGs）。基因本体分析表明，“cellular process”和“binding”在“生物过程”和“分子功能”类别中的DEGs富集最多，而“cell”和“cell part”在“细胞组分”类别中的DEGs富集最多。将DEGs与Kyoto Encyclopedia基因和基因组数据库上的于214、41和229条通路进行比对，发现了51、2和57条通路分别显著富集。本研究发现的光特异性DEGs可作为深入研究刺参对光照变化的生化适应机制的重要目标基因。     

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

高速铁路无砟轨道地基泥岩膨胀性分类分级研究

红层泥岩是一种典型侏罗系沉积岩，其含有微量黏土矿物，易遇水软化、失水崩解，具有一定膨胀性，是引起兰新高速铁路路基持续上拱变形的一个重要因素，故重新判定该种土体膨胀性对高速铁路无砟轨道设计和施工具有重要意义。为此，选取等效蒙脱石含量、阳离子交换量、自由膨胀率和液限为泥岩膨胀性判别指标，通过兰新高速铁路上拱地段大量钻孔实测资料，提出了泥岩膨胀等级分级标准，采用改进层次分析法、基尼系数法和直觉模糊理论确定了判别指标组合权重，基于逼近理想解排序法(TOPSIS法)建立了泥岩膨胀性直觉模糊综合评价模型。结果表明：直觉模糊综合评价模型将泥岩膨胀性进行了定量化，克服了同一试样不同指标属于不同等级判别缺陷；室内膨胀量试验验证了膨胀等级分级标准和直觉模糊综合评价模型对兰新高铁地基泥岩适用性和准确性。研究成果对地基红层泥岩高速铁路路基长期持续上拱变形风险评估和工程控制措施提供技术支撑。     

基于分布式控制力矩陀螺的水下航行器轨迹跟踪控制

基于控制力矩陀螺群(CMGs)的水下航行器具有低速或零速机动的能力。采用基于分布式CMGs的水下航行器方案,并研究其水平面的轨迹跟踪控制问题。通过全局微分同胚变换将非完全对称的动力学模型解耦成标准欠驱动控制模型,并根据简化的模型构建其轨迹跟踪的误差动力学模型,将轨迹跟踪控制问题转化为误差模型镇定问题。基于一种分流神经元模型和反步法设计了系统的轨迹跟踪控制律,该控制器不需要对任何虚拟控制输入进行求导计算,且能确保跟踪误差的最终一致有界性。仿真结果表明该控制器能够实现在不依赖动力学参数先验知识的情况下对光滑轨迹的有效跟踪。     

基于LiDAR的农田地形环境三维重建方法

为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。